Fully Rubber-Lined Wafer Butterfly Valve (2” CL150)

Categories: ,

Description

Technical Data Sheet: Fully Rubber-Lined Wafer Butterfly Valve (2″ CL150)

1. Product Overview

This product is a 2-inch (DN50) Fully Rubber-Lined Wafer Butterfly Valve, equipped with a lever handle for manual operation. It has a pressure rating of Class 150 / PN16. Both the internal surface of the Ductile Iron body and the Disc are fully lined with EPDM rubber. This full-lining design completely isolates the metal components from the flowing media, providing exceptional corrosion resistance and ensuring zero metal-to-media contact. It is manufactured in accordance with API 609 and MSS SP-67 standards, making it ideal for corrosive, abrasive, or high-purity fluid handling applications.

2. Technical Specifications

 
 
 
Item Parameter
Valve Type Wafer Concentric Butterfly Valve (Fully Lined)
Nominal Size 2″ (DN50)
Pressure Rating Class 150 / PN16 (Max Working Pressure 200 psi / 16 bar)
Design Standard API 609 / MSS SP-67 / GB/T 12238
Face-to-Face Standard API 609 Table 2 / ASME B16.10 (2″~12″ Narrow Table) / EN 558 Series 20
Applicable Flange ANSI/ASME B16.5 Class 150, B16.1 Class 125, EN 1092 PN10/PN16
Operation Lever Handle
Applicable Temperature -20°C to +120°C (EPDM Lining)
Applicable Media Water, Sea Water, Acids, Alkalis, Salts, Corrosive Slurries, and other chemically active fluids
Leakage Class MSS SP-67 Type I (Elastic Sealing, Zero Leakage)
Lining Type Full Lining (Body & Disc Internally Fully Lined with Rubber)
 

3. Main Component Materials

 
 
 
Component Material Standard / Grade
Body Ductile Iron + Internal Full Rubber Lining ASTM A536 / QT450-10 + EPDM
Disc Ductile Iron + Full Rubber Encapsulation QT450-10 + EPDM
Lining / Seat (Sealing Ring) EPDM Rubber Rubber Content ≥ 50%, Thickness 3~5 mm
Stem (Shaft) Stainless Steel (Isolated from media by lining) SS416 / SS316
Bushing / Bearing PTFE / Bronze —
Handle Ductile Iron / Cast Aluminum Surface Coated
Body Coating Epoxy Powder (External only) Electrostatic Sprayed, Thickness ≥ 250μm
Fasteners Stainless Steel SS304
 

Note: The internal flow path of the body and the entire disc are completely covered by a seamless, vulcanized rubber lining. This ensures zero contact between the media and the cast iron substrate, preventing rust, corrosion, and media contamination.

4. Design Features

4.1 Full Rubber Lining (Body & Disc)

Unlike standard butterfly valves with only a seat ring, this valve features a fully rubber-lined body and fully encapsulated disc. The rubber lining acts as a protective barrier, completely isolating the Ductile Iron body and disc from the media. This design provides excellent resistance to corrosion, abrasion, and chemical attack, significantly extending the valve’s service life in harsh environments.

4.2 Concentric Structure with Bi-Directional Sealing

The stem passes through the center of the disc, and the disc rotates 90° around the stem. The rubber lining on the body serves as the seat, providing reliable bi-directional sealing performance. The elastic nature of the rubber ensures a tight shut-off even against small particles in the media.

4.3 Lever Handle Operation

Equipped with a lever handle for quick opening and closing. The operating torque is low, making it suitable for applications requiring frequent operation. The handle can be locked in the “Open” and “Closed” positions.

4.4 ISO 5211 Mounting Flange

The top mounting flange complies with the ISO 5211 standard, allowing for easy replacement with a worm gearbox, pneumatic actuator, or electric actuator.

4.5 Anti-Corrosion External Coating

The exterior of the valve body is electrostatically sprayed with epoxy powder, offering strong adhesion and excellent weather resistance, suitable for indoor and outdoor installation. The internal wetted parts rely entirely on the rubber lining for corrosion protection.

5. Main Dimensions and Connection Data

2″ (DN50) Fully Lined Wafer Butterfly Valve

 
 
 
Item Value
Nominal Size (DN / NPS) DN50 / 2″
Face-to-Face (L) 43 mm
Body Flange Outer Diameter (D) 125 mm
Bolt Circle (k) 125 mm
Number of Bolt Holes & Diameter (n-Ød) 4-Ø18 mm
Top Mounting Flange (ISO 5211) F07 / F10
H1 (Body Center to Stem Top) 80 mm
H2 (Total Height incl.
 
Handle) 129 mm H3 (Body Center to Bottom) 24 mm A (Handle Length) 125 mm B (Handle Width) 105 mm Weight (Approx.)
  3.5 kg (Slightly heavier due to lining)

Note: Dimensions above are general reference values. Please refer to the manufacturer’s drawing for exact dimensions. The face-to-face dimensions comply with ASME B16.10 Narrow Table and API 609 standards.

6. Pressure Test

Inspected and tested in accordance with MSS SP-67:

 
 

220 psi)Clean WaterMSS SP-67 Type I Zero Leakage

 
Test Item Test Pressure Test Medium Acceptance Criteria
Shell Test 1.5 × Rated Pressure (Approx.
 
300 psi) Clean Water No Visible Leakage Seat Test 1.1 × Rated Pressure (Approx.
   

Note: Per MSS SP-67, 100% shell and seat tests are performed on all valves.

7. Installation & Operation Instructions

  1. Installation Orientation: The valve can be installed at any angle. Horizontal or vertical stem-up orientation is recommended.

  2. Flange Alignment: Wafer valves must be clamped between two flanges. Ensure the valve body center aligns with the pipe center, and tighten the flange bolts evenly (cross-pattern tightening). Do not over-torque the flange bolts, as this may deform the rubber lining and affect sealing performance.

  3. Flow Direction: Bi-directional sealing valves have no specific flow direction requirement, but it is recommended to install in the direction of the arrow on the body.

  4. Pipe Cleaning: Thoroughly clean the piping system before installation to remove welding slag, debris, or sharp objects that could puncture or damage the rubber lining.

  5. Operation Limits: Handle operating force must not exceed 360N. Avoid using excessive force, which could damage the rubber lining or the stem.

  6. Maintenance: Periodically inspect the rubber lining for wear, blistering, or chemical swelling. To replace the lining, the valve must be removed from the pipeline and serviced by professionals.

8. Applications

  • Chemical processing (acids, alkalis, salts, corrosive fluids)

  • Seawater desalination and marine piping systems

  • Flue Gas Desulfurization (FGD) systems in power plants

  • Water treatment, wastewater, and sludge handling

  • Pharmaceutical and food processing (where non-toxic EPDM is compliant)

  • Mining and mineral processing (abrasive slurries)

  • Steel pickling and electroplating lines

9. Ordering Information

Please provide the following information when ordering:

  1. Nominal Size (DN / NPS)

  2. Pressure Rating (PN16 / Class 150)

  3. Body Material (Ductile Iron)

  4. Disc Material (Ductile Iron, fully encapsulated)

  5. Lining / Seat Material (EPDM / NBR / Neoprene / Viton)

  6. Operation Type (Lever / Worm Gear / Pneumatic / Electric)

  7. Special Requirements (Lining Thickness, Certification Requirements, Pressure Test Report, etc.)