RUBBER JOINT WITH FLANGE
PHOTO SHOWS SPECIFICATIONS AS BELOW
SIZE: 6″
RATING: 150LB
BODY AND BONNET : CS Q345B
RUBBER SLEEVE: EPDM
Description
GENERAL
Size: 2″~48″, DN50~DN1200.
Pressure Rating: 50LB~150LB,PN6~PN16,5K~16K
Design Temperature: CWP AMBIENT
General applications: water, oil , gas
Design & Manufacture: API 594, API 6D, ASME B16.34 are basic,other norms could be used according to orders.
F TO F dimensions: API 6D, API 594, ASME B16.10, BS EN 558, JIS 45SERIES
Connection: AS PER ASME B16.5,ASME B16.47, EN 1092, JIS 5K-20K.RF, RTJ are available.
Structure : LOOSE FLANGE WITH RUBBER SLEEVE
GENERAL MATERIAL
FLANGE: CARBON STEEL, STAINLESS STEEL
RUBBER SLEEVE: NBR, EPDM, BUNA-N, VITON
OTHER SPECIAL MATERIALS ARE AVAILABLE TO CUSTOMIZE.
TEST
Inspection and approval norm: API598, API6D.
QUALITY CONTROL:
100% Chemical analysis and mechanical test with raw materials of each heat numbers.
100% DPT test with the castings, partly MT or UT test, RT is always available if required.
100% hydraulic test with the shell and seal and low pressure air test.
GUATANTEE:
SAVVY VALVES provide 12 months service life at least, free spares and maintenance instruction will be provided when required.